Are you ready to place an order or request a quote?
Heatless Air Dryer
At Morya Industrial Products and Solutions Pvt. Ltd., Pune, we manufacture, supply, and export a wide range of air dryers, including Heatless Air Dryers, Compressed Air Dryers, and Refrigerated Air Dryers. Compressed air often contains oil, moisture, and dust that can harm machinery and processes. Our Drytech Air Dryer Unit-HD Series (Heatless) delivers purified, dry air that meets ISO standards, ensuring reduced wear and tear, increased equipment uptime, improved product quality, and significant energy savings. With negligible maintenance, low operating costs, and long service life, our solutions are ideal for industries needing reliable and efficient compressed air systems.
Selection Criteria
It will be advisable to select dryer in following manner.
- As per ISO 8573.1 for various applications.
- Based on proper flow, pressure and temperature basis for better efficiency.
The complete ADU (Air Dryer Unit) operates in following three modes:
Drying Mode:The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (controlled by electronic timer) to the desiccant bed tower.The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point
Regeneration Mode:The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower.The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.
Pressurisation ModeTo avoid the pressure fluctuations at outlet of dryer,the regeneration mode tower is put in for pressurisation before it switches to drying mode.
The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing.The total cycle time is 10 minutes or as per timer selection for required dew point.
- Operating on ADSORPTION principle; Hence prevents entrainment of moisture in the pipe line however long it may be.
- The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed air at inlet and outlet.
- The stationary working system requires negligible maintenance.
- Assured atmospheric dew point equal to (-) 40 deg.C. or (-) 70 deg.C. as required.
- Ideal purging as per desiccant manufacturers instructions for regeneration.
- Lesser pressure drop in total unit.
- Modified purge silencer causing less noise.
- Designed for Indian as well Global atmospheric condition.
- Easy for installation and commissioning.
| Model | Flow | End Conn. | Conn Type | WT.KGS (appx) | ||
| M3/hr | cfm | |||||
| HD V | 9 | 5 | ½” | BSPT(F) | 25 | |
| HD V1 | 17 | 10 | ½” | BSPT(F) | 35 | |
| HD V2 | 25 | 15 | ½” | BSPT(F) | 70 | |
| HD V3 | 34 | 20 | ½” | BSPT(F) | 88 | |
| HD 001 | 50 | 30 | ½” | BSPT(F) | 105 | |
| HD 001V | 80 | 45 | 3/4″ | BSPT(F) | 150 | |
| HD 002 | 100 | 60 | 3/4″ | BSPT(F) | 180 | |
| HD 002V | 130 | 75 | 3/4″ | BSPT(F) | 190 | |
| HD 003V | 170 | 100 | 1″ | BSPT(F) | 350 | |
| HD 004V | 240 | 140 | 1″ | BSPT(F) | 380 | |
| HD 007 | 340 | 200 | 11/2″ | FLDG.ASA 150# | 430 | |
| HD 009V | 475 | 280 | 11/2″ | FLDG.ASA 150# | 560 | |
| HD 012V | 650 | 380 | 2″ | FLDG.ASA 150# | 670 | |
| HD 016V | 850 | 500 | 3″ | FLDG.ASA 150# | 980 | |
| HD 020V | 1050 | 620 | 3″ | FLDG.ASA 150# | 1250 | |
| HD 025 | 1290 | 760 | 3″ | FLDG.ASA 150# | 1860 | |
| HD 038 | 1940 | 1140 | 4″ | FLDG.ASA 150# | 3850 | |